Duct Groover 5 Grooves 1300mm
5-groove duct beading machine for 1300mm wide sheet, providing stiffening beads for rectangular duct.
Technical Specifications
Key Features
- Adjustable groove spacing
- 5 beads in one pass
- Strengthens duct walls
- Simple operation
Trusted by HVAC Professionals Worldwide
See what our customers say about their Preda Duct Groover 5 Grooves 1300mm
Best value machine we've purchased. The price was competitive, but the quality and support are what you'd expect from a premium brand. Our operators love the intuitive controls, and maintenance is straightforward. Highly recommended for any HVAC shop.
The build quality of this machine exceeded our expectations. Heavy-duty construction, smooth operation, and consistent results day after day. We compared several brands before choosing Preda, and the difference in finish and precision is obvious.
Still Losing Money to Duct Panel Vibration and Deformation?
Every HVAC duct shop faces the same bottleneck: using thicker steel than necessary. When your team spends hours on noisy ductwork from panel resonance, your production capacity drops, labor costs rise, and deadlines slip. The Duct Groover 5 Grooves 1300mm is engineered to eliminate these inefficiencies — automating duct groover 5 grooves while delivering consistent, factory-grade quality.
In this guide, we break down exactly how this machine transforms your 1300mm beading machine workflow, what specifications matter for your operation, and how to calculate your return on investment. Whether you run a 3-person job shop or a 50-employee production facility, understanding these details directly impacts your bottom line.
How It Transforms Your Production Line
The Duct Groover 5 Grooves 1300mm operates on a proven principle: duct groover 5 grooves should be a continuous, automated process — not a series of manual interventions. Here is the step-by-step workflow that makes this possible:
Panel Loading
The sheet metal panel is fed into the beading machine, aligned against the back gauge for consistent rib placement.
Multi-Rib Beading
5 or 7 parallel rib rollers simultaneously press reinforcement grooves into the panel surface in a single pass.
Depth Control
Adjustable roller depth controls rib depth — deeper ribs for larger panels, shallower for small ducts.
Discharge
The reinforced panel exits ready for lock forming and flange operations — significantly stiffer than the original flat sheet.
Technical Specifications & Performance Data
Every specification on this machine is chosen for a reason. The table below shows not just the numbers, but what each one means for your daily production:
| Parameter | This Machine | What It Means for You |
|---|---|---|
| Control System | PLC with touchscreen | Easy programming, consistent results, minimal training |
| Construction | Heavy-duty steel frame | Vibration-free operation, 10+ year service life |
| Certification | CE certified | Meets European safety and quality standards |
| Warranty | 2 years | Peace of mind with comprehensive factory warranty |
Problems Solved: Before vs. After
We asked 50+ HVAC fabricators about their biggest production headaches. Here is how this machine directly addresses each one:
| Without This Machine | With This Machine |
|---|---|
|
✕ Large duct panels bulge and vibrate
Noisy operation, structural failure, failed inspections |
✓ 5-7 parallel reinforcement ribs increase stiffness 3x
Panels stay flat, no vibration, pass inspections |
|
✕ Using thicker steel than needed
Higher material cost, heavier duct, more waste |
✓ Beading allows thinner gauge for same strength
Save 15-25% on material costs |
|
✕ Manual beading is slow and uneven
Hand-operated bead rollers take 2-3 min per panel |
✓ Powered beading, 5-7 ribs in one pass
10-15 seconds per panel, consistent depth |
|
✕ Rib spacing doesn't meet standards
Failed SMACNA/EN 1506 compliance inspections |
✓ Fixed rib spacing meets international standards
Guaranteed compliance, no failed inspections |
Where It Fits in Your Factory
This machine is versatile enough to serve multiple production scenarios. Here are the most common configurations our customers use:
Large Rectangular Ducts
Ducts over 600mm width require reinforcement ribs to prevent panel deflection under pressure — this is the primary application.
Noise-Sensitive Environments
Hospitals, schools, recording studios where duct vibration and noise must be minimized.
High-Pressure Systems
Industrial exhaust and high-pressure HVAC where duct walls must withstand significant static pressure.
Cost-Reduction Programs
Fabricators using beading to downgrade from 22 gauge to 24 gauge while maintaining structural compliance.
Frequently Asked Questions
Click each question to see the answer. These are the questions our sales engineers hear most often:
Professional Packaging & Global Shipping
Every machine is professionally packaged and secured in a container for safe delivery to your port. We send you loading photos before the ship sails.
Calculate Your Return on Investment
Based on average industry data, here is what a typical customer saves after installing this machine:
* Figures based on average customer data for a shop producing material savings from gauge downgrade. Your actual results will vary based on production volume, labor rates, and current efficiency levels. Contact our engineers for a customized ROI calculation based on your specific operation.
Ready to Upgrade Your Duct Production?
Get a customized quote within 24 hours. Our engineers will help you configure the right machine for your specific production requirements.
WhatsApp / WeChat: +86-18355321923 | Email: jason@predamachine.com
