CNC Laser Cutting Machine PL Series
Last updated: October 14, 2026
Fiber laser cutting machine for precision cutting of sheet metal. Multiple bed sizes (1500×3000 / 1500×6000 / 2000×6000mm) and laser powers from 1000W to 6000W — configured to your material and throughput.
Technical Specifications
What is a CNC Laser Cutting Machine PL Series?
A fiber laser cutting machine cuts sheet metal with a high-power laser beam under CNC control. Compared with plasma, fiber laser delivers a finer edge on thin material, cuts reflective metals (aluminum, brass, copper) efficiently, and holds tighter tolerances — at the cost of a higher machine investment. In duct fabrication it is the precision tool for thin stainless, aluminum and detailed fittings.
Key Features
- Three bed sizes: 1500×3000, 1500×6000 and 2000×6000mm
- Fiber laser power 1000W-6000W, customizable to your material mix
- Cuts mild steel, stainless steel and aluminum with one setup
- CNC with nesting software — tight part packing, minimal offcut
- Precision cut edges on thin material with little or no cleanup
Plasma Edges Too Rough for Thin Stainless and Aluminum?
Plasma leaves a heat-affected, slag-edged cut that needs grinding on thin stainless and shows on visible architectural work. Aluminum is slow and expensive to cut with torch processes.
A fiber laser cuts thin steel, stainless and aluminum with a clean, square edge and tight tolerances — nesting software packs the sheet, and the finished parts go straight to forming.
How It Transforms Your Production Line
The CNC Laser Cutting Machine PL Series works on a proven principle — here is the step-by-step workflow that makes it possible:
File & Nest
Parts are nested in CAD/CAM with laser-specific parameters and the program is sent to the machine.
Sheet Loading
The sheet is loaded on the exchange table; the machine references the edge automatically.
Laser Cutting
The fiber head follows the programmed contours, cutting mild steel, stainless and aluminum with the same setup.
Parts Off the Table
Finished parts are unloaded with clean edges — minimal or no deburring before forming.
Technical Specifications & Performance Data
Every specification on this machine is chosen for a reason. The table below shows not just the numbers, but what each one means for your daily production:
| Parameter | This Machine | What It Means for You |
|---|---|---|
| Control System | CNC with nesting software | Consistent, repeatable operation with minimal operator training |
| Construction | Heavy-duty steel frame | Vibration-free operation, 10+ year service life |
| Certification | CE certified | Meets European safety and quality standards |
| Warranty | 2 years | Peace of mind with comprehensive factory warranty |
Problems Solved: Before vs. After
We asked HVAC fabricators about their biggest production headaches. Here is how this machine directly addresses each one:
| Without This Machine | With This Machine |
|---|---|
|
✕ Plasma edge quality
Slag and heat-affected edges need grinding on thin material |
✓ Laser-cut edges
Clean square edges ready to form, minimal cleanup |
|
✕ Aluminum cutting cost
Torch processes struggle with reflective thin aluminum |
✓ Fiber laser
Aluminum cut efficiently at production speed |
|
✕ Material waste
Loose nesting leaves large offcuts |
✓ Nesting software
Tight part packing, higher sheet yield |
|
✕ Multi-material setups
Different processes per material |
✓ One laser setup
Steel, stainless and aluminum from the same machine |
Where It Fits in Your Factory
This machine is versatile enough to serve multiple production scenarios. Here are the most common configurations our customers use:
Thin Stainless & Aluminum
Clean, precise cuts on the thin reflective materials plasma struggles with.
Precision Fittings
Detailed fittings, gussets and brackets cut to tight tolerance from file.
Architectural Ductwork
Visible duct and trim that needs a finished edge without grinding.
High-Mix Shops
Steel, stainless and aluminum in one shift from one machine and one nesting workflow.
Frequently Asked Questions
Click each question to see the answer. These are the questions our sales engineers hear most often:
Professional Packaging & Global Shipping
Every machine is professionally packaged and secured in a container for safe delivery to your port. We send you loading photos before the ship sails.
Calculate Your Return on Investment
Based on average industry data, here is what a typical customer saves after installing this machine:
* Figures based on average customer data for a shop producing 100-500 bends per day. Your actual results will vary based on production volume, labor rates, and current efficiency levels. Contact our engineers for a customized ROI calculation based on your specific operation.
Ready to Upgrade Your Electric Production?
Get a customized quote within 24 hours. Our engineers will help you configure the right machine for your specific production requirements.
WhatsApp / WeChat: +86-18355321923 | Email: jason@predamachine.com
Related Products
Buying Guides for This Machine Type
Before you request a quote: how this machine class compares, what it costs, and how to size it for your production volume.
CNC Plasma Cutter for HVAC Duct Guide
Plasma vs laser vs shear — cutting capacity, edge quality and running cost for duct work.
Read the guide → Buying GuideSheet Metal Cutting Buying Guide
Cutting equipment compared: shears, slitters, plasma tables and fiber lasers.
Read the guide → GuideGalvanized vs Stainless Steel Duct Guide
When stainless is specified — and the cutting and welding equipment it needs.
Read the guide →