In This Guide
What Is an Auto Duct Line?
An auto duct line is a fully integrated production system that takes a coil of galvanized steel and produces finished rectangular duct sections in one continuous process. The line handles uncoiling, leveling, beading, punching, notching, shearing, Pittsburgh lock forming, TDF flange forming, and folding — all automatically.
The numbers (Line 2, 3, 4, 5) refer to how many processing stations are integrated into the line. More stations = more automation = less manual labor = higher output.
Line 3 vs Line 5: Full Comparison
| Specification | Auto Duct Line 3 | Auto Duct Line 5 |
|---|---|---|
| Automation Level | Semi-automatic | Fully automatic |
| Daily Output (8h shift) | 600-1,000 m² | 1,000-2,500 m² |
| Workers Required | 2-3 | 1-2 |
| Pittsburgh Lock | Separate machine needed | Integrated |
| TDF Flange Forming | Separate machine needed | Integrated |
| Final Folding | Manual or separate folder | Integrated (U-shape output) |
| Line Length | 8-12 meters | 18-25 meters |
| Coil Weight | Up to 5 tons | Up to 8 tons (dual decoiler) |
| Material Thickness | 0.5-1.2mm | 0.5-1.5mm |
| Price Range (USD) | $15,000-$25,000 | $35,000-$60,000 |
| Best For | Small shops, startups | Medium-large factories |
Auto Duct Line 3: Detailed Review
The Auto Duct Line 3 is the entry-level automated solution. It integrates three core processes: coil handling (uncoil + level + bead), cutting (punch + notch + shear), and basic folding. Pittsburgh lock forming and TDF flange forming are handled at separate stations.
Advantages of Line 3
- Lower upfront cost — typically 40-50% less than Line 5
- Compact footprint — fits in workshops under 200 m²
- Flexible — can handle irregular shapes and small batches
- Easier maintenance — fewer integrated components means simpler servicing
- Good for startups — lower risk investment while building customer base
Limitations of Line 3
- Requires 2-3 workers (one at line, one at lockformer, one at flange machine)
- Output caps around 1,000 m²/day — hard to scale up for big projects
- Multiple material handling steps increase labor and error risk
View Auto Duct Line 3 specifications →
Auto Duct Line 5: Detailed Review
The Auto Duct Line 5 is the industry standard for high-volume rectangular duct production. It integrates all five processes into one continuous line: coil handling → cutting → Pittsburgh lock → TDF flange → final folding. The output is a finished U-shaped duct section ready for assembly.
Advantages of Line 5
- 2-3x higher output — up to 2,500 m²/day with one operator
- Labor savings — 1-2 workers vs 3-4 for Line 3 + separate machines
- Consistent quality — all processes controlled by one PLC, no handoff errors
- Dual decoiler — 8-ton coils mean fewer coil changes, less downtime
- U-shape output — ducts come out pre-folded, just close and seal
Limitations of Line 5
- Higher upfront investment ($35K-$60K)
- Requires 200+ m² floor space (18-25m line length)
- Less flexible for very small or custom pieces
View Auto Duct Line 5 specifications → | View U-Shape Line 5 →
ROI and Payback Analysis
Let's compare the real economics for a shop producing 15,000 m² of duct per year:
| Factor | Line 3 Setup | Line 5 Setup |
|---|---|---|
| Equipment Cost | $25,000 (line + lockformer + flange) | $50,000 |
| Labor (3 workers × $25/hr × 2000h) | $150,000/year | $75,000/year (1.5 workers) |
| Annual Output | 15,000 m² (at capacity) | 30,000 m² (headroom) |
| Labor Cost per m² | $10.00 | $2.50 |
| Annual Labor Savings | — | $75,000/year |
| Payback Period | — | ~8 months |
Key Insight
At 15,000 m²/year, Line 5 pays for itself in labor savings alone within 8 months. If your shop is currently running 2+ shifts with Line 3, upgrading to Line 5 is almost always the right financial decision.
How to Choose
- Daily output under 600 m²? Line 3 is sufficient and more affordable
- Daily output 600-1,200 m²? Line 3 works but you need 3 workers; Line 5 saves labor
- Daily output over 1,200 m²? Line 5 is necessary — Line 3 cannot keep up
- Workshop under 150 m²? Line 3 fits; Line 5 may not
- Planning to grow in 2-3 years? Buy Line 5 now — upgrading later costs more in downtime
Factory Layout Tips
Line 5 requires careful planning. The line itself is 18-25 meters long, plus you need space for:
- Coil storage (2-3 spare coils at the entry)
- Output conveyor or run-out table (3-5 meters)
- Operator walkway along the full length
- Overhead crane for coil loading (minimum 5-ton capacity)
Many shops arrange Line 5 parallel to a spiral tubeformer so both can share coil storage and crane access.
Frequently Asked Questions
Preda Care: After-Sales That Never Expires
When you buy from Preda Machine, you get lifetime technical support. Our global agent network provides local service in 40+ countries. Free spare parts shipping, remote PLC diagnostics, video call troubleshooting, and on-site installation available.
- 24-hour response time
- Free spare parts shipping
- Remote PLC program support
- Global agent network
- Video call troubleshooting
- On-site installation
Have Questions About Your Project?
Tell us your duct specifications, daily volume, and workshop size — our engineers recommend the perfect equipment within 24 hours.
Get Free Consultation