

Angle Iron Bending Machine JT-50
Last updated: October 14, 2026
Angle iron bending machine for structural fabrication, bending equal and unequal angle steel into rings and curves — the standard tool for making angle iron duct flange rings in your own shop.
Technical Specifications
What is a Angle Iron Bending Machine JT-50?
An angle iron bending machine (angle iron roller) passes angle steel through driven rollers that progressively curve the leg into a ring or arc. In HVAC duct work it forms the angle iron flange rings that stiffen large round and rectangular duct — the same rings fabricators otherwise buy pre-formed or weld from straight segments. JT-50 covers angle sizes up to 50×50mm and 5mm thickness.
Key Features
- Bends equal and unequal angle steel up to 50×50mm
- Handles material up to 5mm thick — structural as well as duct gauge
- Adjustable bend radius for any ring diameter
- Electric drive, 1.5 kW — runs from standard shop supply
- Forms flange rings, stiffening rings and structural curves in-house
Buying Pre-Bent Flange Rings or Welding Them From Segments?
Pre-bent flange rings come at a premium and in fixed sizes, and welding a ring from straight segments means cutting, fitting and welding every joint — hours of work per ring.
The JT-50 rolls angle steel to any ring diameter on your own floor: load the straight length, roll the curve, cut and close the ring. Flange rings become a minutes-long job instead of an hour-long one.
How It Transforms Your Production Line
The Angle Iron Bending Machine JT-50 works on a proven principle — here is the step-by-step workflow that makes it possible:
Angle Loading
Straight angle steel is fed into the roller train — equal or unequal leg, up to 50×50mm and 5mm thick.
Progressive Bending
Driven rollers progressively curve the angle along its length; passes are repeated until the target radius is reached.
Radius Check
The operator checks the rolled curve against the ring template or former and adjusts roller pressure for the final pass.
Ring Cut & Close
The rolled arc is cut to length and the ends closed — welded or bolted — into the finished flange ring.
Technical Specifications & Performance Data
Every specification on this machine is chosen for a reason. The table below shows not just the numbers, but what each one means for your daily production:
| Parameter | This Machine | What It Means for You |
|---|---|---|
| Control System | Electric roller drive | Consistent, repeatable operation with minimal operator training |
| Construction | Heavy-duty steel frame | Vibration-free operation, 10+ year service life |
| Certification | CE certified | Meets European safety and quality standards |
| Warranty | 2 years | Peace of mind with comprehensive factory warranty |
Problems Solved: Before vs. After
We asked HVAC fabricators about their biggest production headaches. Here is how this machine directly addresses each one:
| Without This Machine | With This Machine |
|---|---|
|
✕ Pre-bent rings at a premium
Bought-in rings cost more and come in fixed sizes |
✓ Roll your own rings
Any diameter from straight stock, at material cost |
|
✕ Segmented welded rings
Cut, fit and weld every segment — hours per ring |
✓ Continuous rolled arc
One rolled length per ring, one joint to close |
|
✕ Limited to one angle size
Bought rings dictate your flange design |
✓ Up to 50×50mm angle
Equal and unequal legs, flange design is yours |
|
✕ Lead time on rings
Supplier lead times stall duct assembly |
✓ In-house rolling
Rings made the day the job needs them |
Where It Fits in Your Factory
This machine is versatile enough to serve multiple production scenarios. Here are the most common configurations our customers use:
Round Duct Flange Rings
Roll the angle iron or flat steel rings that flange large diameter spiral and welded duct.
Structural Duct Support
Form the stiffening rings, banding and support curves for big duct runs and risers.
General Steel Fabrication
Any shop curving angle iron — gates, railings, frames and structural hoops.
Cost-Conscious Shops
Rolling from straight angle stock is the cheapest route to any ring diameter — the machine pays back on the first large job.
Frequently Asked Questions
Click each question to see the answer. These are the questions our sales engineers hear most often:
Professional Packaging & Global Shipping
Every machine is professionally packaged and secured in a container for safe delivery to your port. We send you loading photos before the ship sails.
Calculate Your Return on Investment
Based on average industry data, here is what a typical customer saves after installing this machine:
* Figures based on average customer data for a shop producing 100-500 bends per day. Your actual results will vary based on production volume, labor rates, and current efficiency levels. Contact our engineers for a customized ROI calculation based on your specific operation.
Ready to Upgrade Your Electric Production?
Get a customized quote within 24 hours. Our engineers will help you configure the right machine for your specific production requirements.
WhatsApp / WeChat: +86-18355321923 | Email: jason@predamachine.com
Related Products
Buying Guides for This Machine Type
Before you request a quote: how this machine class compares, what it costs, and how to size it for your production volume.
Round Flange Forming Guide
Angle iron vs flat steel flange rings — which to roll, and the line that forms them.
Read the guide → Buying GuideRound Flange Production Buying Guide
Sizing flange production to your duct diameter range and daily output.
Read the guide → Buying GuideSheet Metal Bending Buying Guide
Rollers, brakes and benders compared for structural and duct work.
Read the guide →

